The Markon 9880 Touch Dry® Contact Ink Drum Coder uses a DC motor drive for intermittent online packaging. The compact 9880 can be flexibly mounted on most intermittent vertical form, fill or seal (VFFS) packaging machines. The 9880 is designed to print dates and batches on packaging films or l ......
A new nanoclay-filled nylon series, Dinalon, was newly developed by CrupoRepol, Spain. The Dinalon series contains fine layered clays that are attached to PA resin and dispersed in PA by the action of organic compounds. According to Grupo Repol, lamellar clays are dispersed in the resin to form a ......
Pad printing steel generally requires the following aspects: 1. Has good wear resistance. The steel plate will be damaged in every contact abrasion with the blade. The blade is made of high carbon steel, which has high hardness and sharpness. It is necessary to scrape the ink on the surface of th ......
Brand packaging is a company's quality, reputation and a window that reflects the overall image. It can not only demonstrate the enterprise spirit, operating characteristics and service concepts, but also bring more emotional enjoyment and convenience to consumers. In the past, people used to ......
French company Arkem a recently developed a special chlorinated polyvinyl chloride (CPVC) product, Lucalor CPVC, which is easier to blend with PVC to improve its rigid plasticity and other properties. It can give PVC materials better heat resistance than Low heat distortion, good flame retardancy, ......
Paper texture There are many types of specialty papers, and there are also great differences in the expressiveness of print design. Designers must understand and master the characteristics and performance of different specialty papers in order to make better use of their advantages and design a v ......
9, cutting device The bonded single-sided corrugated cardboard shall be slit according to certain specifications according to the processing requirements. It is mainly composed of longitudinal slitter consisting of slitter blades and crosscutting of upper and lower long blades. It is actually a s ......
2. Color foil Color foil, also called powder foil, is a kind of hot stamping material made by coating pigments, resin adhesives and other solvents on the film base. Hot foil stamping can be used to create a variety of color graphics. The development and production of colored foils is later than ......
Under normal circumstances, most of the area of ​​the blanket will be removed when the coating is applied. In this case, the blanket will lose its stability, leading to inaccurate overprinting, and PRINTEC will solve this problem well. Add 0.014 inches of polyester backing material t ......
At the Westborough plant in Astracon, the secret to the success of blow-fill-seal technology is the development of a wide range of expertise and regards implementation and operational challenges as opportunities for growth. As blow-fill-seal (BFS) technology matures, as single-dose packaging beco ......