Model NO.: B. GLS-III, B. ZT-III, B. ZFG-II
Packaging Technology: Welding, Injection
Application: Dairy Products, Cosmetics, Skin Care Products, Hair Care Products
Soft and Hardness: Flexible Package
Circulation Function: Outer Packing
Frequency of Use: Packing
Mode of Operation: Packaging of Export Products
Trademark: non
Transport Package: Wooden Crate
Specification: 12.7, -----60mm
Origin: China
Product Introduction
B.ZT-III Automatic shoulder injection machine
Mould Size Diameter (mm): 19, 22, 25, 28, 30, 32, 35, 384050, 60
Automatic soft tube production line can connect Tube making (PE tube extruding, Lami tube sealing) with shoulder injection machineforming an automatic process. This line is suitable for PE extrusion tube, plastic laminated and aluminum plastic laminated sealing tube.
The main technology is about the automatic shoulder injection machine.
Â
(Same production) Tube making & shoulder injection total 2 operators Tube making & shoulder injection total 4 or 6 operators
Transferring process operators No requirement 2 operatorsÂ
Operators Annual salary  60,000 RMB 120,000 RMB to 180,000 RMB
Power cost, quantity 1set 2sets
Power consumption 12KW 22KW
Power consumption
70% calculation 8.5KW 15KW
Power cost per day(1.2RMB/KWH) 224.8RMB 432RMB
Annual consumption (300days) 67,440RMB 129,600RMB
Â
What's more, this automatic production line has advantage of sanitation, which decreases the pollution of manual tube put & lift, reaching requirement in stricter daily cosmetic and food packaging industry.
You can save more cost by making investment in this line instead of cost saving in more than 2 years.
Choose our products, choose our after-service.
SUNWAY products---your regretless choice!
Some question for Automatic shoulder injection machine:
1. Available diameters:Dia19-60
2. Production speed: 50pcs/min
3. Rejection : 2%
4. Time for changing moulds: 4-7hours
5. 1-2-2 Operators needed for whole line: 4 people
6. Whole line power consumption: 65kw
7. Whole line occupies14meter(length)*10meter(width)
8. Whole line compressed air consumption in CBM:
B.ZT-III Shoulder injection machine: 1.0m?/min
B.GLS-III Tube machine: 0.6m?/min
B.KFX-II Aluminum sealing &capping machine: 0.5m?/min
9. Cooling water temperature for whole line: 15 to 23.
10Tube plant temperature keeps from 25 to 27.
Â
Â
Laminating Machine,Thermal Film Laminating Machine,Automatic Laminating Machine
Die Cutting Machine Co.,Ltd , http://www.nslaminmachine.com