How to quickly identify the quality of the wardrobe sheet when purchasing the wardrobe?

[ Chinese wardrobe network ] bought a new house, the rest is the furniture purchase. What should I pay attention to when purchasing a wardrobe in the bedroom? As a consumer, how do we quickly identify the quality of the wardrobe sheet when we buy in the wardrobe? The following Chinese wardrobe network teaches you 4 small tricks.

1, look at the surface texture and knot

The solid wood wardrobe has a natural color difference, and its color and texture have certain differences. The appearance of the solid wood skinned wardrobe is very small, and its texture is clear and even better than the solid wood wardrobe. Consumers can use the texture and knots of solid wood to see the corresponding positions on the exterior and back, respectively. If the correspondence is good, it is a pure solid wood cabinet door. In addition, look at the knot is also a good way to identify pure wood: look at the location of the side of the scar, and then find the corresponding texture on the other side.

Wardrobe design

2, the use of wood cross section

For the identification of the wardrobe combined with the wood and wood, it is generally said that the large-area positions such as the wardrobe frame and the laminate, the drawer inner panel, etc. are artificial panels. If the manufacturer puts the solid wood skin on the artificial board, although the surface is smooth and the durability is improved, the two sides of the board will be found to intersect the texture wood grain, which is not the normal growth direction of the tree. This is the main identification method.

3, see the nail hole position during installation

Some frames use solid wood, side panels, shelves, etc., which use veneer-coated particleboard or MDF wardrobes. The center of the panels is actually plywood or various waste wood. This kind of wardrobe is difficult to identify when looking at the sample, but when you install it after entering the field, you can see the position of the nail hole. If the particle board has wood chips, the MDF will be pulpy. Consumers can use this feature. Identification.

4, using the feel and smell identification

Consumers can tap a few times on the wooden surface, the solid wood material will make a crisper sound, while the artificial board will have a low sound. In addition, the solid wood skin feels very textured, and the general artificial paper skin feels dry. The most common but very effective method is to smell the smell of the closet at close range. Most wood has the aroma of tree species, pine has a rosin flavor, cedar has a light fragrance, and eucalyptus has a distinct eucalyptus taste, but fiberboard and MDF have a strong pungent odor, especially in cabinet doors or drawers. Inside, it smells easier to distinguish.

Diamonds Painting

Diamond Painting, also known as Diy Diamond Painting, is a combination of exquisite and shining artificial crystal flat-bottomed round diamonds (some square diamonds) and well-designed patterns organically combined by diamond painting designers. The diamond is glued to the corresponding symbol on the canvas, so that the pasting of a diamond is completed, and then slowly fill in the area corresponding to each symbol, and it can be officially started in a few minutes. Compared with cross stitch, diamond painting has the advantages of simple operation and ease of use. To make the same pattern, the time of diamond painting is about 1/10 of that of cross stitch. Divided into crystal diamond color diamond painting, magic square diamond painting and square diamond painting!

 Diamond Painting: Flower Tree



flower diamond painting,flower diamond painting kits,flower diamond painting accessories

Dongguan Junkai Packaging Products Co., Ltd , https://www.diystoragecase.com