Use automatic packing machine to do packaging, one of the most important steps is to define the process. A good work of the project is based on the characteristics of the process, not on the basis of automation equipment to make the final design. When defining, you should consider the following questions: Firstly, in the form of product packaging structure, it directly affects the need for automatic operation device and movement of the material way. When operating more complex packing, direction is more difficult. Increase directional demand of the system complexity. When filling the box, the manipulator end automatic operator can get enough product, the box can be filled in once took. This also allows automatic operation device to move more short, and can make products continuous transmission. Secondly, automatic design of packaging mainly depends on the total amount of production. Production lines is faster, and various devices can help automation work pressure, but the standard automatic device to follow the package may be less. The speed of the production line will not only affect the automation device, and will also have effect in labeling and inspection. Needing effective visual detection technology, it must make some relevant content clear. For example: the parts drawing is consistent, transfer speed has no differences and other factors, these will affect the visual system form and cost. In general, the more weight to detect, operation will be faster, so the structure is more complex. Thirdly, operation of automatic packing machine needs the various departments to communicate constantly and cooperate with each other. All the departments and personnel should work together as a team.