Sweeping robot use method, sweeping robot cleaning method

With the continuous advancement of technology, the home appliances in our lives have been continuously improved, more and more intelligent, and more and more convenient. Have you ever heard of sweeping robots? Although sweeping robots are also robots, they are not the robots we usually see. The sweeping robot is just a small circular machine. Although the size of the sweeping robot is not large, the function is very complete. So how much do you know about the use of sweeping robots? Everyone still needs to know more about cleaning robots.

Sweeping robot usage

1. The robot that you bought back, the charging base is best placed in the corner, so it won't get in the way.

2. Now the sweeping robots are all charging functions. But the battery inside is not particularly durable. Therefore, the robot that has just been bought must be fully charged in the first three times and used up and refilled. Red means the battery is not full, green means the charging is completed

3. Press the 2 green button and the robot will start cleaning. Since the robot won't remember the route, the efficient way to clean it is to close the door and let the robot sweep a room and a room, so you can take a lot of duplicates.

4, of course, there are also remote controls. You can scan regularly and you can define the way to sweep. However, this feature is rarely used. Throw it there and let him sweep more.

5, after sweeping for a while, you have to dump the garbage. Otherwise, where is the garbage? Definitely in the stomach. Gently press the finger to the point, then take it off and the trash cover will pop open automatically.

6, saw it, that black is the garbage box

7, pull out along the handle, is a brown box. There is a buckle next to it, open the box and see a layer of filter.

8. Open the filter, is it sucking a lot of dust and garbage?

9. If the hair falls on the ground at home, it may wrap around the brush wheel. At this time, we can use a screwdriver to unscrew the brush wheel and remove the hair.

Sweeping robot cleaning method

1, test machine

Just after receiving the machine, try the smart sweeping robot. If there is any electricity, let it sweep the ground directly and test whether the machine can run normally~ You turn on the power switch on the side of the machine (O is off, - is on), touch The machine screen or remote “auto-clean” button will work. If there is no surplus power, it will be charged directly; when using the residual electricity cleaning, the cleaning effect is not good, because the surplus power is insufficient; then we must first install the carriage, then fully charge it, while sweeping Health is clean

2, charging:

When the power is discharged, it will be directly charged. Direct charge is directly connected to the fuselage with the power supply (there is a small round hole above the switch on the side of the machine that can be plugged into the power supply), charging for 12 hours or so ~ so direct charge three times, must be charged enough time ~ is to activate The battery; after three direct charge, you can directly charge it, or you can use the back seat to let it automatically backflush. If you want to backflush, you have to find a good position for the back seat, connect the power supply to the back-seat seat, and put it back on the wall. (Return to the front of the block for 3 meters, 0.5 meters or so, no obstacles or low-lying ground. In order to avoid affecting the machine's induction, the machine will detect the back-seat when it is running out of power and then automatically run over to charge.

3. Install the carriage:

There are two plastic clips on both ends of the transparent plastic box at the bottom of the machine. Press the tab vertically to the bottom of the clip to complete the installation. You said that you can't get it when you press it. Wood has a relationship. You can install it cleanly. It is very simple to clean the mop. You can directly remove the mop and clean it. You don't need to remove the drag.

4, virtual wall:

The virtual wall, as its name suggests, is a virtual "wall." The virtual wall is used to divide the non-clean area. If you don't want it to enter a certain area, you only need to put the virtual wall transmitter, the machine will automatically avoid it; the virtual wall should be equipped with a pair of batteries, the battery is in accordance with one positive and one negative. The order is placed, and the baffle has a warning mark on it. There is a button on the virtual wall. The leftmost switch is the low-end, mid-range and high-end. The width of the three gears is 3m, 5m and 7m respectively. This needs to be adjusted according to the actual situation.

5, clean up the garbage box:

The garbage bin of Zhibao sweeping machine is a one-button type. Press and hold the dust box key to take out the garbage box and dump the garbage. It is very convenient. Remember to take the fan out before cleaning, and do not let the fan enter the water.

6, set the time:

After booting up, press the remote control "Clock/Week 3" button, the number next to the display "week" will flash, and then press the current week (for example, today, Monday, press the Monday button, the flashing number will change Enter "1" and press the enter key again. The week setting is completed. Then set the time, press the “Clock/Week 3” button, then press the “Left or Right” in the middle of the arrow keys below to flash, press the “Up and Down” of the arrow keys to adjust to the current time, press Enter.

7. Appointment time:

After setting the time, you can make a reservation. You can make an appointment and then make a reservation. Press the “Reservation/Week 2” button on the remote control, and the alarm icon at the top of the display will flash. Then press the week you need to make an appointment (for example, if you want to make an appointment on Monday, press the Monday button) and press OK. If you want to make another appointment on Tuesday, then repeat the above operation, press the 2 button when the alarm icon flashes, then press OK. By analogy, if you need to make a reservation for the week to sweep the sweeper, you can make a reservation for the specific time. Press “Appoint/Week 2” first, then press the left or right button of the arrow keys, the middle number will flash, press Adjust the “Up and Down” of the arrow keys to the time you want to make an appointment, then press OK to complete.

Note: D mode is on, all appointments are invalid!

8, clean up:

The sweeper needs to be cleaned regularly to see if there is a hair brush or a wire entangled on the side brush, the middle sweep. Here we focus on how to remove the middle sweep: push the red lock on the side of the brush, then lift the clamp cover, you can take out the brush and the rubber brush to clean up, and the small aprons on the ends of the sweep are easy to fall, you need to pay attention.

Sweeping robot, also known as automatic cleaning machine, intelligent vacuum cleaner, robot vacuum cleaner, etc., is a kind of smart household appliances, which can automatically complete the floor cleaning work in the room with certain artificial intelligence. Generally, the brush cleaning and vacuum method are adopted, and the ground debris is first absorbed into its own garbage storage box, thereby completing the function of ground cleaning.