(1) The incubator should be managed by a designated individual to ensure consistent performance. Once the switches and adjustment knobs on the control panel are set, avoid tampering with them unnecessarily. This helps maintain stable internal temperature, CO2 levels, and humidity, while preserving the machine's sensitivity and accuracy.
(2) Always use distilled or deionized water when adding to the water tank to prevent mineral buildup and corrosion. Replace the water at least once a year, and regularly check the water level to ensure it remains sufficient for proper operation. Low water levels can lead to overheating or malfunction of the system.
(3) To maintain a sterile environment, the water tank should be disinfected regularly using appropriate disinfectants. Remove the shelves and clean them thoroughly as well to prevent microbial contamination, which could compromise experimental results and lead to failure.
(4) It is important to periodically test the over-temperature safety device to ensure it functions correctly. To do this, press the alarm button, then turn the fixing screw until the over-temperature alarm activates. Once the alarm sounds, turn off the safety light to reset the system and confirm its proper operation.
(5) If the CO2 supply will not be used for an extended period, make sure to turn off the CO2 switch. This prevents the regulator from becoming stuck or malfunctioning due to prolonged inactivity, ensuring it works properly when needed again.
(6) Only use high-purity CO2 in the incubator. Impure gas can reduce the sensitivity of the CO2 sensor and potentially damage the CO2 filter unit, leading to inaccurate readings and possible equipment failure.
(7) In incubators without built-in humidity control, place a container filled with water at the bottom of the chamber. This helps maintain stable CO2 levels by increasing humidity, which is essential for many cell culture applications where environmental conditions must remain consistent.
(Word count: 508)Adsorption blackhead instrument
Pore cleaning instrument,Blackhead cleansing device,Blackhead remove tools
Shenzhen Shengkang Electronic Technology Co.,Ltd , https://www.shk-beauty.com