With the progress of the times, nowadays, there are lifting and drying racks in the home of the friends. There are manual drying racks and electric drying racks . The pulleys are used to lift the clothes rods up and down, which is convenient for people of different ages to dry clothes and greatly reduce housework. burden.
So what details should you pay attention to when purchasing clothes racks? Xiaobian takes you to find out.
The content of this issue
1 manual drying rack VS electric drying rack, how would you choose?
2 What should I pay attention to when purchasing a drying rack?
3 What are the common problems encountered with the drying racks?
Electric VS hand crank
Netizens often struggle with two problems
1 electric and hand crank how to choose, what is the difference
2 first install the ceiling or first install the drying rack, the difference between the first install and the rear install
1
The difference between electric and hand drying racks
Installation: Hand- operated drying rack installation must reach 12 eyes (2 handles, 8 on the top, 2 on the wall), slightly affecting the appearance, may damage the tiles; electric drying racks are mainly played 4 Holes and will be covered by the main unit. The appearance is better than the manual drying rack.
On the steel wire: the hand-drying rack wire is easy to wrap and wear; the electric air-drying hanger main box has a winder, the wire branch will not fight, and the wear is small; there will be no noise.
Use: Hand-cranked clothes hanger is fixed on the wall, it will be more difficult to dry heavy objects; electric remote control remote control range 30m, generally 360 ° no dead angle (but sometimes need to find remote control )
Price: Overall, the hand-drying racks are much cheaper than the electric racks. The basic hand-drying racks are mostly around 500; the basic models of electric racks are mostly around 1500, and the function is directly affecting the price of the racks. factor.
Load-bearing: Hand-bearing load-bearing capacity is worse than electric ones. There are many brands of electric drying racks that can carry more than 70 kg.
2
Ceiling and drying rack installation sequence
The first drying rack is installed in the ceiling and directly mounted on the original top;
The rear-loading drying rack is installed under the ceiling, and the wire needs to be reserved. The installation is to put the screw first, and the screw is suspended from the original top, so there is no such thing as the first installation and the later installation. The post-installing effect is more beautiful.
That is to say, if the ceiling is installed at home, it can also be equipped with a drying rack. Generally, it is recommended to install it later, and the effect is more beautiful. Of course, you can choose to install the suspended ceiling without first touching it. This is not completely prescribed. Progress to install.
Precautions during the drying rack purchase process
Manual drying rack
The hand-drying rack is controlled by us to reach the right height, suitable for drying clothes, quilts and so on. It is more energy-saving and environmentally friendly, but it is relatively difficult to use when drying clothes. Suitable for a family of three or clothes to dry clothes.
The manual drying rack is composed of five parts: hand crank, wire, steering gear, top seat and drying rod. These five parts are also important to focus on when purchasing.
1. Hand crank: The hand crank is the core component of the drying rack. It is very important. When buying, you should turn the hand crank directly to see if it is smooth and the sound will not be too loud.
2, steel wire: look at the material, look at the thickness, three look at the flexibility. It is easy to wear when it is mixed together, and it is necessary to pay attention to the material of the steel wire when purchasing. Most of the wire ropes of the drying racks are made of 202# stainless steel wire, and a few high-grade ones will be made of 304# stainless steel wire.
The wire ropes are connected to the hand shaker and the drying rod respectively. The poor 201, 202# stainless steel on the market will rust. The thicker and softer the wire rope, the better. The method of identification is to fold the wire rope in half, and let it see if it can be restored.
3, drying rod: buy the lifting rack hanger pole is not the thicker the better, but moderate. Too thick a pole that shakes too heavy and is not suitable for lifting. The thickness of the rod should be moderate, and the thickness of 1.0 to 1.2 mm is suitable.
The material of the drying rod is generally stainless steel, aluminum-magnesium alloy, titanium alloy, and aviation aluminum.
At present, more and more businesses will use aviation aluminum, which will not rust and feel very comfortable, and the price is higher than that of titanium alloy. Identify the material can look at the manufacturer's instructions, or directly force the ends of the lever, the aluminum alloy tends to bend, can not be reduced, titanium alloy will not.
It should be noted that the drying rods of some cheap drying racks on the market currently use aluminum alloy for recycling aluminum, and the low-purity aluminum has low cost, high impurity, easy rust, reduced bearing capacity and short life.
Another point is to look at the surface treatment of the profile: the general surface is polished, electroplated, sprayed or electrophoretically processed. Polishing for a long time is easy to black. Some drying rack brands now use electrophoresis, which is relatively better.
Electric drying rack
Generally, the remote control is used to control the proper height, and it is not necessary for us to manually lift and lower the labor. Especially when drying the quilt, the electric drying rack does not need to take the effort to shake it by hand. It is more suitable for families with more family members. It is more worry-free when drying.
The electric drying rack is composed of the main machine, the scissor frame, the steel wire, the clothes pole, the lighting lamp, etc. These parts also need to be paid attention to when purchasing.
1, the host: aluminum alloy, aviation aluminum (light)
2, scissors frame (windproof) + steel wire 7 * 7 shares, bearing capacity is still possible.
3, clothes rail + drying rod = telescopic rod
Electric drying racks will add some features, such as:
Lighting: Some lights now choose LED lights, some are energy saving lights. Energy-saving lamps are easy to break and difficult to repair.
Remote control remote control: This should pay attention to the quality of the remote control. It is recommended to check if the remote control is easy to use when purchasing. Check each switch and function to prevent problems later.
UV disinfection: This function is mainly aimed at having a baby at home. I think it is still necessary. As for whether there is a big disinfection effect, I have used it before I know it.
Air drying: Some electric drying racks will have a hot air or cold air drying function, which plays a good role in the yellow season clothes can not be dried.
Other functions: such as mobile APP control, natural light lighting, automatic height adjustment, falling sensing control, voice broadcast, power outage storage, etc.... It can only be said that the development of drying racks is also very rapid. The more functions, the higher the price will go up. When you buy, you still have to follow your own needs and budget.
Editor: China drying rack net - Dio
Ningbo XISXI E-commerce Co., Ltd , https://www.petspetstoys.com