Won the 2005 GATF InterTech Technology Award. With this product, the printer can easily switch between traditional, UV, and mixed ink printing without having to replace the printing roller.
Prime UV System's new Prime IR Action Dryers (Infrared Dryer) can be combined with the company's UV curing equipment to become a complete curing/drying system for water-based ink printing UV coating. The system incorporates a central operating control system for the installation system, the Prime IR Action Dryers dryer and the Prime UV Curing System.
A-Korn Roller (Chicago)'s WEROMIX Ink Roll delivers stable, UV and UV blending inks. In the UV irradiation environment, the ink roller has a small expansion coefficient and ensures thorough cleaning in the conversion between the conventional, UV and mixed inks.
Phoenix North America's Ruby Carat blankets are UV-resistant surface materials that compress the middle layer, thus increasing the life of the blanket surface and providing good print quality. The filler material in the EPDM surface material helps prevent swelling when transferring ink.
RBP Chemical Technology supplies a range of products including fountain solutions, plate cleaners, and chemicals used to wash press car wash water using UV/ED/mixed inks.
Fountain solution:
* Concept 21 system.
* Unitrol 9000 (The surface tension is said to be close to the ink and the resistance is small)
* Unitrol CTP (for CTP plates)
Plate cleaner:
* PC 400 A UV-removable, scratch-removable plate cleaner.
Car wash water:
* UV Wash HF is suitable for all rubber materials * UV Wash 5700 is suitable for EPDM rubber materials.
Technotrans can be said to be the exclusive market for all sheetfed offset IST UV curing systems in the United States and Canada. The sheet-fed offset printing environment is sensitive to heat. Texture-free substrates such as foils, polymer molecular materials, insulating materials, plastics, and ultra-light labels are ideal candidates for using IST's CoolCure - in inert gas environments. Under UV curing. The product is made by replacing oxygen with nitrogen for UV curing to increase curing efficiency. Because the UV curable system uses less energy to cure the ink or varnish, the amount of heat received by the substrate decreases.
Technotrans also recently launched a new URS reflector, which is said to reflect UV light more efficiently onto the substrate and therefore consume less power to achieve high-quality curing.
Technotrans also exhibited some new technologies on IST UV curing equipment at the PRINT 05 show, including the design of a new UV reflector, the construction of the lamp tube, and operational control and energy selection.
The company has also prepared a new type of thermal energy system for the drying of inks and waterborne coatings in high-speed printing.
Blue Island Newspaper Printing Corporation has newly established Prime Systems Inc. The company is equipped with a high-quality new curing system on its Goss SSC. This new cold air drying system can achieve high-speed UV ink online curing. The Blue Island system is currently used for the drying of double-sided rotary presses with a speed of 28,000 iph using Flint Ink Arrowlith UV inks.
Baldwin claims that the quick start technology of the GraphiCure GC9 UV curing system allows customers to start UV lamps in seconds without preheating. The system uses air cooling.
When the printer is in the non-operating state, the UV lamps of the GraphiCure GC9 will be extinguished, so that the operation of the grating and other movable parts is not required, and the maintenance and maintenance work is reduced.
One simply presses the button of Air Motion Systems' Peak UV system, where the slidable components slide into place. Only one operator is required to move the modules of the system without any tools. You can mentally place all the modules in the system – an operator can move the module at the end of a press to the position where the press needs to be installed within a few minutes. These modules are all pluggable.
The geometry of the Wide-Beam reflector enables a high-speed curing process with lower energy. A purely mechanical cooler is responsible for the cooling of UV curing modules and printing presses. For the drying of waterborne coatings, AMS offers the Peak IR product, an infrared/hot air drying system that is said to be very flexible to ensure proper heat, air and exhaust balance.
AMS has prepared Cool Impressions for plastics and adhesive substrates. It is an impression cylinder cooling system designed for the UV treatment of heat-sensitive substrates.
UV Process Supply (Chicago) provided a free manual "Maintenance of UV-curing equipment." The main contents are:
* Maintenance and parameter measurement of UV lamps * Correct method of cleaning reflectors and UV lamps * Detailed catalog of replacement parts * Cleaning of various parts of the system * Correct filling of inspection records
sideboards and cabinets,solid wood sideboard,small sideboard cabinet,sideboard storage cabinet
Famous Home Living(Dongguan)Co.,ltd , https://www.famoushomeliving.com