The geothermal floor is “radiated through the floor, the indoor temperature is uniform, the temperature is radiated upward from the ground, and decreases from bottom to top.†According to relevant experts, geothermal floor radiant heating will become the main heating method in the future. Domestic heating and decoration began in the mid-to-late 1990s, and it has been ten years now. Wood and bamboo are good natural materials. The heat from the ground is transmitted to the surface through the floor. There is bound to be heat loss. The ideal floor can minimize these losses. So in order to reduce the loss of heat and reduce heating.
The use environment of geothermal floor is complicated, especially in the northern part of the country. The ground in the non-heating season is subject to various moisture, and the floor temperature of the heating is suddenly increased. The floor must withstand the double changes of “temperature†and “humidityâ€. Therefore, the geothermal floor must be purchased with good material stability, such as laminate flooring, multi-layer solid wood flooring, and bamboo flooring. Moisture-proof and heat-resistant. The integrated composite floor should use adhesive, and the adhesive should meet the three indicators of environmental protection, bonding strength, high temperature and high humidity aging. Especially for the geothermal floor, it is necessary to pass the experiments of high humidity resistance and low temperature resistance. If ordinary adhesives are used, the environmental protection index, moisture resistance, aging resistance and expansion ratio cannot meet the standard. Therefore, when consumers are shopping, it is very necessary to check the product report and inspection report of the merchant. The wear resistance should be durable. Since the geothermal floor should be thin and not thick, the composite surface layer is generally 0.3-0.6 mm. The wear resistance of the main surface layer is higher than the traditional index.
The use environment of geothermal floor is complicated, especially in the northern part of the country. The ground in the non-heating season is subject to various moisture, and the floor temperature of the heating is suddenly increased. The floor must withstand the double changes of “temperature†and “humidityâ€. Therefore, the geothermal floor must be purchased with good material stability, such as laminate flooring, multi-layer solid wood flooring, and bamboo flooring. Moisture-proof and heat-resistant. The integrated composite floor should use adhesive, and the adhesive should meet the three indicators of environmental protection, bonding strength, high temperature and high humidity aging. Especially for the geothermal floor, it is necessary to pass the experiments of high humidity resistance and low temperature resistance. If ordinary adhesives are used, the environmental protection index, moisture resistance, aging resistance and expansion ratio cannot meet the standard. Therefore, when consumers are shopping, it is very necessary to check the product report and inspection report of the merchant. The wear resistance should be durable. Since the geothermal floor should be thin and not thick, the composite surface layer is generally 0.3-0.6 mm. The wear resistance of the main surface layer is higher than the traditional index.
Outdoor Dining Chairs and Benches
Outdoor Dining Chairs And Benches,Outdoor Arm Dining Chair,Gray Dining Chair,Outdoor Dining Chairs
INCHEE FURNITURE CO.,LTD , https://www.incheecasa.com