How to Change the Baud Rate of an 80mm Thermal Printer
The process for changing the baud rate on an 80mm thermal ticket printer is slightly different from that of a 58mm model. While the 58mm series typically requires using a configuration software or sending specific commands via the printer's interface, the 80mm series offers a more user-friendly method in addition to those options.
One of the most convenient ways to adjust the baud rate on an 80mm thermal printer is by using the DIP switches located at the bottom of the device. These switches allow you to manually set the communication speed without needing any software or external tools.
Specifically, the DIP switches labeled No. 6, No. 7, and No. 8 are used to configure the baud rate. By toggling these switches into different positions (ON or OFF), you can select various baud rate settings. For example, certain combinations may correspond to 9600, 19200, 38400, or 57600 bps, depending on the printer model. It’s important to consult the printer’s manual for the exact switch settings and their corresponding baud rates.
This method is especially useful for users who don’t have access to the configuration software or prefer a quick and straightforward adjustment. Just make sure the printer is powered off before changing the DIP switch settings to avoid any potential issues. Once the switches are adjusted, power the printer back on and test the connection to confirm the new baud rate is working properly.
By understanding how to use the DIP switches, users can easily customize their printer settings to match their system requirements, making the 80mm thermal printer a versatile choice for various applications.
deep wave human hair wig,real hair lace front wigs,natural hair wigs human hair
Xu Chang Zhuo YunQing crafts Co., LTD , https://www.wowqueenhair.com