Detailed description of luxury hardcover - processing technology (3)

In addition to the cutting of the book block, the cutting process of the book block also includes the process of flower opening. The Huaikou is more complex than the rolling of the Golden Port, and the quality requirements are quite strict. It is required to make it once during the operation and there is no room for rework.

1) Flower mouth material and formula

1 materials: including adhesive and color two.

Adhesives: Dilution with hydrochloric acid (bottom adhesive), clear water, flour paste, seaweed boiled.

Pigments: yellow, red, blue and fresh cattle bitter gall.

2 preparation.

â–² color material preparation,

a. Take three weights of equal weight. One by one, each color material is ground into a fine powder using porcelain enamel or copper enamel (the finer the finer it is, the finer particles are not allowed). Do not mix with each other while grinding. Clean the dishes after each color is finished. The ground toner is put into a transparent container for use.

b. Put the fresh cow bitter gall bladder (select one or two according to the amount) in the container, add no water, stew in boiling water (about 10 minutes after the water boils), and then evenly distribute into 3 colors (1 fresh Cattle gall color each with 15-25g) and immediately stir until ready for use.

â–² adhesive preparation.

There are two kinds of adhesive material, the bottom adhesive and color adhesive. The role of the bottom adhesive is to make the color material firmly adhere to the incision; the role of the color paste is to adhere the color to the surface when it is sticky)

a. Bottom adhesive: Take 1/4 hydrochloric acid solution and 3/4 clear water and mix evenly.

b. color paste: the flour and sea creatures boiled water mixture diluted heating, boiled into a fine sticky liquid (viscosity slightly thicker than the scouring) can be.

â–² ingredients requirements.

a. All kinds of material ingredients should be placed properly to ensure that flower mouth bond;

b. Take a little test before dosing, add the amount after the appropriate preparation, to avoid waste due to non-conforming requirements;

c. Strictly maintain the purity of various colors and ensure the correct color of the flower mouth.

2) Tools and Uses

1 A rectangle-shaped container box (with wooden tin or aluminum skin in wooden box) with a box length of 800 mm and a width of 300 mm (Figure 7-1). The box is divided into two sections, a section of which is 600mm long and is used for storing paste adhesives. The other section is 200mm long. It is used for storing the remaining materials after the filing. The two sections are separated and cannot be mixed.

Figure 7-1 Storage and adhesive container box

A: Container box B: Needle box C: Draw color D: Wooden stick pattern

(to be continued)