Detailed information Instrument introduction:
◠Viscometer with the most functions can measure viscosity and temperature at the same time ◠LCD directly displays viscosity (CP or cSt), percentage scale (%), speed (rpm), rotor (SP), temperature (° C) , And shear rate (SR) / shear stress (SS), density (g / cm3), etc. ◠Can read kinematic viscosity (CP) or kinematic viscosity (cSt)
Technical Parameters:
1. Model: VISCO STAR L
Viscosity measurement range: 1 * ～ 2,000,000cP (mPa.s)
RPM: 0.3-200
Speed ​​selection: 19
Number of rotors: 4
2. Model: VISCO STAR R
Viscosity measurement range: 100 ～ 13,000,000cP (mPa.s)
RPM: 0.3-200
Speed ​​selection: 19
Number of rotors: 6 + 1
3. Model: VISCO STAR H
Viscosity measurement range: 2 Poise ～ 1,060,000 Poise
RPM: 0.3-200
Speed ​​selection: 19
Number of rotors: 6 + 1
â— Recommended configuration:
Rotating viscometer + JULABO special temperature controller for viscosity measurement (for details, please refer to JULABO "Economic / Standard" Heating Refrigeration Circulator)
main feature:
â— Automatic response and range switching, overrun alarm, programmable control measurement function, automatic rotor identification â— AUTO-RANGE function can predict the maximum speed range under the current speed and rotor combination â— Automatic instrument function test, if the instrument has a fault, it will Sound and light alarm â— AISI316L stainless steel rotor â— Users can use standard viscosity oil for instrument calibration â— Resolution: (1) Use LCP (low viscosity adapter): 0.01; (2) When viscosity is lower than 10000CP: 0.1; (3) When the viscosity is higher than 10000CP: 1
â— Communication interface: RS232, 12C, plotter
◠Datalogger software can realize data download and printout ◠Measurement accuracy: ± 1.0%; reproducibility: ± 0.2%
◠Temperature range: 0-100 ° C, temperature accuracy: ± 0.1 ° C; temperature sensor: Pt100
â— The standard configuration of the instrument includes:
Viscometer host, standard viscosity rotor kit, Pt100 temperature sensor, bracket, rotor protection rod, suitcase, supporting software â— Optional accessories:
(1) Standard viscosity oil; (2) Additional rotor; (3) Constant temperature water bath; (4) Small sample adapter; (5) Ultra-low viscosity adapter; (6) Lifting bracket, T-shaped rotor; (7) Spiral and DIN adapter; (8) quick connector and extension hook; (9) chart recorder; (10) paddle rotor
Beech is a hard, strong and heavy wood. It has a fine, tight grain and even texture. Beech wood is very light in colour and has a high shock resistance. It is a popular wood for cutting board and will give your kitchen a warm feeling. With its smooth finish it is a great wood to polish.
Beech Wood Cutting Board,Beech Wood Paddle Board,Natural Wood Cutting Board,Cooks Chopping Board
YangDong Q-Bamboo Houseware Co.,Limited , https://www.q-bamboo.com