Foreign packaging elements reveal Chinese elements

With more and more emphasis on personality and creativity, the packaging design of products has become more and more important. China is a country with a history of 5,000 years. Historical culture has a long history. Some foreign packaging designers have also taken a fancy to this point, revealing Chinese traditional cultural elements in their own designs.

This is a packaging project for a roof garden in Brooklyn. This garden is located in Brooklyn Sunset Park and is named after the "8" which symbolizes the prosperity and wealth of Chinese culture. This garden is right on the eighth street in Brooklyn. The design of the language is inspired by Chinese calligraphy, which balances order and vitality. Use Chinese traditional top-to-bottom, right-to-left ordering in writing.

It is believed that China’s long history and heavy cultural heritage can bring more inspiration to the packaging designers.

Peristaltic pump
There are a few plaster sprayers that have a peristaltic pump (a tube squeezed by rollers) which also requires compressed air to produce a spray. These types of plaster sprayer can also spray textured coatings with particle sizes up to about 3mm diameter, providing that they are not solvent based.

Piston pump
Newer types of plaster sprayer have a piston pump, which has sufficient pressure to spray smooth (untextured) plaster without compressed air. Full airless pumps are sometimes used to spray smooth plaster, although they are not ideal as the flow rate is too low for volume projects; however, they can be used to spray solvent-based plasters.

Air operated piston type supply pumps can put out as much as 27 gpm. Like the Graco Bulldog 10:1 at about 9 gpm and the Lincoln Pile driver 5:1 at about 27 gpm. These flow-rates are calculated at a maximum of 120 cfm air supply. Material supply hoses are medium pressure at about 600 psi. These pumps are material supply pumps only and additional air is required at the spray gun to propel the material to the surface. These guns are usually an internal mixture type guns where the material and air exits the gun together.

Pump Assembly

Pump Assembly,Piston Pump Putty Sprayer,Electric Piston Pump Sprayer,Hydraulic Pump Assembly

Fuzhou HVBAN Mechanical Equipment Co., Ltd. , https://www.hi-sprayer.com