[ Chinese wardrobe network ] Some owners regretted not having a cloakroom, thinking about the use of the toilet in their room is not very large, so they started to change the bathroom to the cloakroom. However, such a change is very troublesome, because if the waterproofing of the upstairs bathroom is not done well, if there is a leak or the like, the clothes will be removed. How to change it better?
First, the bathroom to change the cloakroom success case
This space involves three sets of furniture, one is the wardrobe , the general price is around 1500RMB, followed by the dressing table, the price is in a few hundred pieces, the fitting mirror is also around 100, the overall price will be controlled at around 2500RMB.
The main function of the cloakroom is to store clothes. It is definitely necessary to have a large closet. The space of each cabinet can meet the daily needs. The sliding door is both beautiful and moisture-proof. The original position has a wall sill if it If it is a load-bearing wall, hide it in the cabinet, if it is not directly removed.
There is a dressing table opposite the closet. The dressing table can be used for ironing or ironing on the cabinet. A wall lamp can be used to help you dress and iron.
Since it is a cloakroom, there must be a fitting mirror. It is very practical to put a fitting mirror on the left side of the cabinet.
Second, the bathroom to change the construction of the lock room
1. If your home is not the top floor, you should pay attention to the waterproof problem. Since the waterproofing of the upstairs bathroom is not controlled by you, the safest way is to add a waterproof ceiling to the cloakroom.
2. Under normal circumstances, the bathroom was originally made waterproof, but due to the construction of the renovation, the original waterproof layer may be destroyed, so it is necessary to re-waterproof. If the budget allows, you can also apply waterproof coating to the entire cloakroom, such as the top, the wall and the ground.
3, it is best not to be close to the wall when making the wardrobe, the middle can use the keel structure to leave a certain gap, the bottom of the cabinet is also better to have a certain distance from the ground.
4. Although it is now changed to a cloakroom, it is best to pack all the pipes on the top into the ceiling for use in restoring the bathroom.
Third, the bathroom to change the choice of clothing room
1. The cloakroom that has been changed from the bathroom should pay attention to the choice of plates when making the cabinet, because it is very important to keep the moisture and keep out the moisture. There are many types of ceiling materials in the bathroom. If it is changed to a cloakroom, it is better to use a micro-aluminum gusset for the ceiling to provide ventilation and prevent condensation. If you think that the aluminum plate is not beautiful enough, if you choose gypsum board for ceiling, you must pay attention to choose waterproof gypsum board and apply waterproof latex paint.
2, the wooden wardrobe is very easy to get wet, if the moisture enters the cabinet, it will cause the cabinet to deform. Therefore, the door panel of the cloakroom is preferably made of a moisture-resistant wear-resistant plate and a polymer-polymerized plate, and a rust-proof metal is used as a support leg at the bottom of the cabinet.
Fourth, the cause of water seepage in the bathroom
1. Cracks occur in rubber concrete;
2. After the waterproof layer is completed, the subsequent process destroys the waterproof layer (applied brick);
3, the use of poor waterproof materials (cheap no good goods);
4, did not do as required waterproof layer or waterproof layer thickness (> 1.2mm);
5, did not do node processing as required (node ​​processing is not good);
6, the decoration slotted buried pipe damages the original waterproof layer causing water leakage;
7. When the waterproofing is done, the base surface does not meet the requirements, and there are phenomena such as sand and looseness;
8. The shrinkage of water pipes and cement produces cracks.
The study table on the market can adjust the height of the table according to the height of the child. The study table is an essential tool for children to do homework. For example, there is a great and handsome study table on the market. The function is intelligent lifting and lowering, and the desktop can be folded. , When a person sits in front of the table, they naturally enter the concave table top, and the two arms droop naturally. Because the two elbows are supported by the concave plate, the body naturally does not lean forward, which effectively solves the shortcomings of lying on the stomach to write and study. When shopping for a Study Desk, be sure to keep these must-have features in mind. The focus of the study table is to correct the sitting posture and prevent myopia, which is a foldable study table with a concave table top.
Space-saving children's table,A space-saving study table,Space-saving Desk with drawers,Children's learning table
Igrow Technology Co.,LTD , https://www.aigrowdesks.com