Since CTcP officially appeared in China as a new computer-to-plate technology, its rapid development has attracted the attention of people in the plate-making industry. It has become another "dark horse" after thermal CTP and violet laser CTP, especially for small and medium-sized enterprises. The favor of this article will introduce you to the thermal plate processor.
When the plate processor is enabled, first check whether the circulation pump works normally, whether the interfaces and pipes are leaking, and ensure that the gears of each component are operating normally. After use, turn off the power and water, and use a cleaning bottle to rinse off the liquid crystal attached to the roller shaft and gear. Rinse the rubber roller with clean water to remove the glue remaining on the rubber roller, and replenish the liquid in the refill tank.
The thermal plate-making machine uses a fine microcomputer control system to control the data, functions such as squeezing time, liquid medicine and drying temperature, circulation filtration, cleaning rubber roller, and secondary glue washing. A variety of modes, such as random correction, are available for selection.
The thermal plate-making machine is equipped with an emergency stop switch on the imported plate feeding table; it is convenient for handling problems under special circumstances and avoiding unnecessary troubles. Drying automatic protection device for overheating; automatic refilling device for low liquid level; closed protection device for mechanical transmission system; and safety design of safety warning signs for important safety parts of the machine.
T-125 plate-making machine is a new-generation thermal CTP printing equipment designed by our company according to the actual application situation of domestic and foreign users, by absorbing foreign advanced design concepts and technologies, and collecting the experience of our company for many years of professional production of pre-press printing equipment. The plate-making machine passed the inspection of the National Printing Machinery Quality Supervision and Inspection Center in September 2009, and the evaluation was good, reaching the leading level of similar products in the printing industry. The structure of the whole machine is reasonable, the technology is excellent, the materials are exquisite, the degree of automation is high, the adjustment of the washing process is wide, and the scope of application is wide. It is an ideal choice for the printing equipment in the printing industry.
Article source address: http://
OPT handle
IPL handle
SHR handle
E light handle
tattoo removal handle
Guangzhou serika Technology Co., Ltd. , https://www.serikamedical.com