The plate processor must be installed on a flat, clean indoor floor. For the convenience of operation and maintenance, the space left and right of the machine must be no less than 750mm wide. There must be sufficient plate and plate space before and after the machine. This article will introduce you to the plate cleaning machine.
The development of a plate printer means a process of expressing a latent image which is formed by exposure on a film or a plate by using a reducing agent. The development of the PS version is that when the printed image is displayed, it can have the printing layout and layout performance that meets the printing requirements.
According to the working principle of the violet laser newspaper CTP, the printing plate enters the platen machine and then needs to be preheated and solidified first, then passes through the brush to the developing solution tank, and waits until the printing plate comes out of the developing solution tank. The procedures of washing, gluing and drying are started, and finally the finished product can be produced.
It can be known that under normal circumstances, the brush roller needs to be rotated in time to ensure that the film on the printing plate can be cleanly cleaned; the developer replenishing pump needs to be added in time when the developer is insufficient, and the developer solution is not sufficient. Need to add again.
The manufacturing company has developed and produced a special cleaning agent for the plate-making machine, which is used for cleaning the surface crystallization of the rubber roller in the plate-making machine and crystallization of the inner wall of the tank, and the effect is good. The product here is generally a composite strong acid software salt granule, or a liquid concentrate cleaning agent, which is specially used for the dirt treatment of the PS plate developing machine, and is non-corrosive to the mechanical and rubber rollers and the brush.
Article source address: http://
Horizontal L type Wind Turbine
This SL type wind turbine is horizontal axis, like a windmill, with PMG generator. This L type wind turbine is for home use, power range is 1KW ~ 5KW, also could match up with solar panels to make a whole energy system. The blade length could be 1.25m ~ 1.95m, not very big, so you can use it near your house, on your farm, etc.
Horizontal Wind Turbine, Wind mill, Wind generators
Wuxi Smaraad New Energy Technology Co., Ltd. , https://www.smaraadenergy.com