Automatic paper-making machine is mainly used in the printing and packaging industry for paper jams, paper jams and corrugated paperboard stickers. The aircraft has the following features.
(1) The paper-sheet feeding section is unique in design. It adopts a new soft material PU wear-resistant sun gear and belt for paper feeding, which is smooth and smooth, and will not cause any wear on the printing surface of the paper. For different thicknesses of paper adaptability.
(2) Unique synchronizing pawl design of the paper aligning system allows both the top paper and the bottom paper to enter the gluing section at the same time, and enables the fine adjustment of the top and bottom paper during the operation of the machine.
(3) The bottom paper feed section adopts a perforated belt suction paper feeding mechanism imported from Japan. The suction force is strong and the paper feeding is stable. Can be applied to 350g/m2 above cardboard and A, B, C, D, E, F, N, and three, five, seven cardboard, high-speed transport, smooth and accurate.
(4) The back paper feeder adopts a unique synchronous pusher feeding mechanism, which can achieve 350g/m2 above paperboard and A, B, C, D, E, F, N, and three, five, and seven layers. Cardboard smooth, accurate delivery.
(5) The glue application system adopts a fully automatic glue replenishment system, which is automatically detected and replenished by the electronically controlled fluid controller during the lamination process. According to the different requirements of the paper, the thickness of the coating layer can be freely adjusted to make the coating more uniform. And with recycled glue recycling, save glue and avoid waste. Solved glue coating glue rejection problem, make the paper out of the flat, accurate.
(6) The transmission system adopts the Japanese production timing belt as a transmission element, which is soft, strong, durable, wear-resistant, pull-resistant, and heat-resistant, and synchronous belt pulley ensures synchronization accuracy. In combination with the synchronized push paws driven by the Japanese chain and the perfect adjustment system and the alignment structure of the side plates, the fitting error can be controlled within ±1.5mm, and the damage rate of the paper can be reduced.
(7) The adjustment system adopts a Japanese-made precision phase adjuster, which can realize the adjustment of the fitting error during the high-speed operation of the machine, which is accurate, and greatly improves the production efficiency.
Mini VTOL RC Airplane ,EPP material, safe,lightweight and drop-resistant. VTOL RC Airplane apply Aero dynamics design,making the flight faster,more stable and more comfortable.With powerful 1806 2300KV brushless motor Outstanding speed and climb performance.Can do vertical takeoff / suspension flight,horizontal flight mode,self-propelled flight,low-speed cruise flight,360°stunt flight,gliding take-off flight and hand-throwing flight.Support flight mode one key switch. Support ultra low-speed flight. Support FPV flight.support the size of the rudder conversion.Support take off and landing within a very small range .
Mini VTOL RC Airplane,RC Planes for Beginners,RC Planes for Adults,Mini RC Drone
Airjugar Technology Co., Ltd. , http://www.airjugarFPV.com