Recently, many times have been rated as excellent private technology enterprises in Guangdong Province, Guangdong Province, high-tech enterprises, such as the name of Dacheng Machinery Co., Ltd. spread the good news, the scientific research personnel's hard work, a kind of GAG three-layer coextruded PET sheet The machine's new packaging machinery was successfully developed at Dacheng. This indicates that the company has taken the production of high-end equipment as its business direction, and has completely independently developed the technical strength and mass production capacity of high-tech environmental protection packaging machinery.
Dacheng Company is one of the earliest private enterprises established in Shantou City. At the initial stage of the company's establishment, it was only able to produce some plastic food packaging machinery with low technological content. As the market develops and needs, Luo Qingqing, general manager of Dacheng Company, is keenly aware In order for enterprises to survive and develop, they should not always stay at the level of producing backward products. They must develop high-tech equipment and realize the upgrading of products as quickly as possible. It is in this sense of urgency and the concept of being a step ahead. After conducting extensive and in-depth investigations on the market, decision-makers concluded that the demand for PET sheets in China is very large and increases at a rate of 10% per year. The domestic PET sheet production equipment is very old and the technology is relatively backward. The main performance For low speed, high energy consumption, low level of automatic control, lack of stability and performance. To this end, Dacheng company once again introduced foreign advanced technology and concentrated on the development of PET extrusion sheet machine on the basis of years of experience in producing vertical, horizontal and oblique extrusion sheet machines. There is a path that is hard work. After more than one year of repeated design, development, testing, and improvement, Dacheng has finally successfully launched a three-layer co-extruded PET extrusion sheet machine with high technical content. After the inspection and appraisal by the science and technology department, the technical performance and quality standards of the equipment have reached the leading domestic level in terms of applicable materials, extrusion layers, sheet thickness, forming width, and automatic control of the whole machine, and can completely replace foreign high-priced imported products.
PET three-layer co-extruded sheet machine is a dedicated high-tech equipment used to produce PET packaging materials. The so-called PET, a common name for polyethylene terephthalate, is a new type of environmentally-friendly packaging material, non-toxic and non-corrosive. It has been certified by the US FDA and is widely used in the packaging of food, medicine, and daily necessities. Its distinguishing features are: rationality of packaged food; brilliant transparency; excellent toughness; 4% higher than PVC production (secondary molding); ETO anti-oxidizing ethane and gamma ray can be used for low temperature sterilization; Reducing energy consumption; No hard whitening phenomenon; Small particles when cutting, no dust; Good adhesion, standard aluminum film; Good barrier properties; Non-toxic, non-corrosive; Faster molding cycle than PVC; No need for frozen molds; The tensile strength is equal to that of the aluminum film, and is 9 times higher than that of polyethylene (PE) and 3 times higher than that of PC and PA.
Because of the technical difficulty in producing this high-quality material, it has a very high demand for PET sheet production equipment. At present, there are few companies capable of developing such high-tech equipment in China, and the technical quality is not stable. Manufacturers with large demand for such equipment have to import it from abroad at a high price. The PET extruded sheet machine introduced by Dacheng Company not only has the same technical quality as other similar foreign equipment, but also costs only about 1/6 of that of foreign products. This is a boon to the majority of PET sheet manufacturers. In the demonstration of the three-layer co-extruded PET sheet equipment of Dacheng Company, an expert from the China Plastics Committee stated that the successful development of the three-layer co-extruded PET sheet machine of Dacheng Co., Ltd. not only filled the market gap, but also brought The social and economic benefits are also immeasurable, and its market prospects are very broad.
According to incomplete statistics, there are many manufacturers are very optimistic about this equipment, of which more than 10 customers have signed contracts for ordering goods with Dacheng company amounted to several tens of millions.
Source: China Packaging News