Transfer technology of ceramics and metal products (1)

Ceramic products are dye-sublimation-transferred and sublimate to the merchandise at a high temperature of approximately 200 degrees Celsius. The color is sharp and the pattern is highly reliable. However, the general mug cannot be directly transferred, and the pattern must be transferred after a special treatment of coating.



Heat transfer method using electric iron
Due to the limitation of the calorific value of the electric iron, it is generally not possible to transfer an item with an A4 size (approximately 20 x 30 cm or more). The electric iron must be able to adjust, and the greater the power, the better.

1. First adjust the iron to the cotton fabric (that is, about 170-190°C), and warm it up until the heat indicator light is on;

2. Place the clothes on the ironing board and use the iron to remove the moisture for a few seconds on the part to be printed.

3, transfer paper printing surface down on the clothing to be transferred to the site, with stickers on the four corners of the paper to prevent paper movement;

4. Lay high-temperature flexible asbestos cloth on the clothes with good transfer paper, and flatten it with four clips on the edge of the ironing board;

5, with the iron slightly back pressure slowly back and forth in the heat transfer cloth with a part of the transfer of hot 20-30 seconds, depending on the size of the time the size of the flexible master;

6. When the transfer paper is not cooled, remove it from the clothing, otherwise it will stick.





T-shirts and cotton fabrics after transfer maintenance method

1. The T-shirt with the film transfer will have a hard feeling and you will become softer after washing.

2. Newly processed T-shirts should be washed after 2 hours. Turn clothes over to wash.

3. Do not rub the surface of the T-shirt pattern by hand (the material of the pattern surface will not be attached with dirt).

4. Do not wash with detergent containing bleach.

5. Wash with warm water or cold water below 40°C.

6. Try not to wash with a washing machine.

7. After washing, do not dry it with a clothes dryer.

8. To dry naturally, do not twist clothes, do not expose T-shirts to the sun.

9. If the clothes need ironing, after drying, use medium-temperature steam ironing (not including high-temperature ironing of elastic fibers, so as not to damage the structure of elastic fibers, affect the elastic effect of the clothes), and do not iron directly on the pattern.

10. After ironing, do not tuck into the narrow spaces. Hang them on hangers or spread them flat to keep them flat.



T-shirt transfer paper usage

1, light-colored plastic film thermal transfer paper usage: the pattern image printing, cut off the image of the blank part of the print surface down in the clothing and pillowcases need to transfer parts of the surface covered with a layer of high-temperature asbestos insulation paper, Heating with a tablet or iron, the transfer paper can be removed before it is cooled.

2, dark plastic film transfer paper usage: the pattern of the front print, remove the back of the front of the paper (print surface) is attached to the need to transfer the site, after laying high-temperature insulation paper and then use the tablet heating. Note: There are currently dark T-shirt transfer papers with mirror-printing on plastic transfer paper.

3, penetrative sublimation transfer paper Usage: A, the first fixing agent (to prevent the chemical detergent on the ink erosion, prolong the fade time, it is recommended to use) after shaking evenly with the little finger pressure type spray can spray in the T-shirt need to turn Printed parts, open or dry; B, with sublimation ink to print the image on the smooth side of the T-shirt paper, the tablet is heated to 180-200 ° C; C, the T-shirt paper printing face to be Part of the cotton clothing transfer, press the tablet machine for 20-25 seconds (some tablet machine heating plate is not equipped with high-temperature cloth, preferably a layer, play a protective role), after the completion of the transfer, T-shirt transfer paper It is better not to leave ink marks. (Please use a high temperature cloth in the middle of the cotton T-shirt, otherwise the ink will penetrate the back of the clothes)

T-shirt transfer paper and sublimation two ways that effect is good?
After transferring with a thermal transfer ink, the pattern is printed on plain paper, and the pattern can be transferred by spraying a modifier on the ordinary cotton T-shirt that needs to be transferred. The chemical fiber fabric can be directly sublimated and transferred ( 180 degrees 30 seconds). T-shirt transfer paper can be transferred by ordinary ink. With the popularity and price reduction of sublimation inks, many people now use thermal sublimation ink to print plastic film T-shirt transfer paper, but T-shirt transfer paper The effect is not good for thermal transfer, but sublimation transfer cannot do dark clothes.

How to carry a cotton T-shirt transfer?

Chemical fiber or blended light-colored garments containing less than 70% cotton can be directly transferred by thermal sublimation. The breathability is free from the hand. The image and overall effect are better than any imported film transfer paper, and the price is cheaper. For 100% cotton, the modifier was previously used, which is cumbersome to use and tends to yellow when heated. It is now suggested that you can use thermal sublimation special paper with cotton textile fixing agent to transfer, but it is still a little troublesome, it is best to use low-cotton blended T-shirt for processing, fast and good, heating time to 40 seconds or more. Dark clothes can only be transferred with adhesive film.

There are also problems with the yellowing of cotton T-shirts. Many users do not complain that the ink is not good, that is, the transfer paper is not good, or there is a problem with the fixing agent. Actually, the textile printing and dyeing process and raw materials are different, he chose the kind of cloth. Can not withstand the high temperature of 180 degrees, you can use the tablet directly with a 200 degree heating test, not yellow can be used.