Can effectively remove the attached ink on the anilox roller (including UV water-soluble ink and most solvent inks) and ink agglomeration.
Traits: Emulsion Fluid Color: Milky Odor: Aromatic Citrus Applicable: Suitable for use in circulatory systems
Features:
Safety, environmental protection, low toxicity and low harm
Convenient, mild and alkaline, chemical ingredients that are banned from PRTR.
Strong removal of dry, hard crumb block
Specializes in cleaning the mesh of the ink roller with the container-type squeegee and rubber-coated squeegee roller (including chrome anilox roller and ceramic anilox roller), which can make the ink circulate smoothly after cleaning. Does not damage the mesh. It can also remove ink agglomerates caused by using UV inks and water-soluble inks. After cleaning, color density can be enhanced and print quality can be improved.
No pollution, no damage to other machine parts
Instructions:
Use Life Power to clean anilox rollers
Life Power stock solution can be used to clean mesh that is blocked by ink and varnish. For an anilox roll that has not been cleaned for a long time, the ink system can be turned off first, then about 9 liters of Life Power can be poured into the ink pool, combined with starting the ink pump to soak for 1-2 hours (the first use needs to be soaked for 4-5 hours). The cleaned oil will crystallize on the surface of the ink pool, and the ink agglomerates will sink to the bottom of the tank. Use filters or filters to filter varnish crystals and other floats so that Life Power can be recycled up to 20 times. Finally rinse the anilox roll with clean water for 2-3 minutes. The use of a cyclic cleaning method does not affect the operation of other printing equipment (excluding some older models) even when the anilox roller is cleaned and stopped. And can also clean the roller and remove the hard ink block in the ink tube.
Using Life Power to Clean Plates
Automatic & manual cleaning
Use Life Power stock diluted 3-5 times with water. The diluted emulsion is sprayed on the plate and after 2-3 minutes it is cleaned with an automatic cleaning device or with a brush.
Immersion cleaning
Dilute Life Power stock 5 times before use. Pour the diluted solution into a flat-bottomed container and place the plate in it for several hours. Finally brush again.
Ways to enhance Life Power's effectiveness: Warm the solution to 50oC; use ultrasonic cleaning.
Note: Do not use undiluted Life Power stock solutions for cleaning plates, as the edge adhesive may be severely damaged.
Source: Global Corrugated Boxes
Custom Corrugated Cardboard Floor Displays
Creative Displays Now specializes in designing, manufacturing, and distributing custom corrugated floor displays for the retail environment. Ideally, point of sale (POS) floor displays are designed to market your product through eye-catching graphics and structural creativity. Our structural and graphic display design,project management, and sales teams have years of experience to help your company launch your retail floor displays into the marketplace. Successfully market your product with custom floor display stands designed with us.
Display Paper Box,Small Cardboard Boxes,Folding Paper Box,Paper Display Boxes
DongGuan SanQun Packing Products Co.,Ltd , http://www.sanqunpacking.com