Improper handling of pesticide bottles

According to inspections by staff of the Environmental Protection Agency, these bottles contained a pesticide that was used to kill moths, which was toxic and harmful to the human body. Because of the phosphorus-containing ingredients, they smoke when they come in contact with water. Phosphorus-containing pesticide bottles emit “fog” fog when they encounter water, and sanitation workers think that fire and water are used to pour water. As a result, the smoke will increase. At noon yesterday, Taixing fire emergency dispatched, will be discarded in a garbage transfer station more than 300 pesticide bottles safe transfer.
At 10 o'clock in the morning, sanitation workers found garbage at a rubbish transfer station on Jiangping Road in Taixing and found that the rubbish was smoking outside. The sanitation workers thought that children had set fire to the rubbish, so they poured water over the rubbish, but the smoke was thickening. The sanitation workers had to call 110 and 119 for help. Two fire engines and more than 10 firefighters from Taixing Fire Brigade arrived at the scene. According to investigations, there are more than 300 abandoned pesticide bottles in the garbage transfer station, and smoke is emitted from the bottles. Firefighters speculated that the bottle contained some kind of chemical composition and immediately brought in sand and mud to cover up the pesticide bottle. Half an hour later, the smoke gradually dispersed. The firefighters and the staff of the Taixing Environmental Protection Bureau transferred the pesticide bottles from the garbage transfer station to a safe place and buried them.

The Polypropylene Joint for Plastic Infusion Container is made of the imported medical‐class polypropylene; where the material complies with FDA rule and passes the USP CLASS VI test. Beneath the joint, itis a ship‐shape, which will form a plastic liquid infusion bag after welding with non‐PVC co‐extruded film; the top opening is the inlet for loading liquid medicine. After filling the liquid medicine, the top opening will be melted to seal with the composite cap, and then form a complete soft‐bag liquid infusion product. The joint is produced in the clean plant, with the overall plant reaching to Class 10,000 and some for Class 1,000,000. The main working procedures, such as the injection molding, inspection, cleaning, inner packing and so on, are designed and processed as per the cleanliness requirements at the partial level of Class 100 , which passes the GMP on‐site certification and complies with the cleanliness requirements of high capacity injection medicine.

The surface of production equipment is smooth, flat, and easy to clean and sterilize, with sound corrosion‐resistant property, and inert to make chemical reaction with packing material. The precision and sensitivity of test and inspection instruments comply with the test and inspection requirements of products.

The polypropylene joint for plastic infusion container is mainly used for the pipe of non‐PVC soft‐bag.

PP Joint For Plastic Infusion Container

PC Cap For Infusion Bag,Plastic Infusion Container PP Joint,PP Joint For Infusion Container,Joint for Plastic Infusion Container

YANGZHONG HONGYUN BOTTLE CAPS MAKING FACTORY , https://www.hongyunyz.com