Shanghai Billan aseptic homogenizer maintenance.
In order to ensure that the aseptic homogenizer remains in optimum condition for a long time, it should be maintained frequently. We recommend the following suggestions for the operation methods, maintenance, troubleshooting, etc. that need to be paid attention to during use:
Precautions:
(1) The power plug must be inserted tightly. Looseness may affect the computer controller to cause a crash. If there is a crash, please turn off the rear power switch and restart after 3 minutes of shutdown.
(2) Do not open the homogenizer door when working on the hammer plate to avoid overflow of the sample liquid. The device should be stopped automatically by pressing the "On/Off" button. When the door is closed, press the “ON/STOP†button again and the device will automatically complete the remaining work.
(3) If the instrument is not used for a long time, turn off the power and remove the plug.
(4) The bottom of the homogenizer door prevents accidental rupture of the homogenized bag, which is convenient for cleaning the spill. The bottom design is empty, and the water tray can be placed. Therefore, do not extend the hand from the bottom when the instrument is running, so as not to smash the finger. .
(5) Before the machine is running, please check if there is any foreign matter in the homogenizer to avoid malfunction and damage to the homogenized bag during work.
(6) Hard, bone, and ice-like substances should not be used to avoid damage to the homogeneous bag.
(7) The instrument and the homogenized bag should be stored away from direct sunlight. In particular, the homogenized bag should be stored in a place free from sunlight or ultraviolet rays to avoid aging.
(8) When the amount is small, when the speed is high, when the homogenous fiber is tough, the rear knob can be used to adjust the spacing between the slap plate and the window to achieve better homogenization.
BILON brand, service attentively
HDF door skins are also called molded door skins.We have customized more than 100 different molding
designs/patterns such as 2-panel, 3-panel, 4-panel, 5-panel, 6-panel, oval, etc. We normally produce 3.0mm
plain/white primed HDF door skins and 3.2 wood-veneered HDF door skins.
HDF door skins: veneer Door Skin, Melamine Door Skin, plain door skin
Door Skin
Door Skin,HDF Door Skin,Melamine Door Skin,HDF Moulded Door Skin
Shouguang Bailing Wood Industry Co., LTD. , https://www.bailingfurniture.com