Heidelberg small format paper cutter and folding machine (below)

two. The Stahl small format folding machine and the Bora small format series paper cutting machine are the Stahl's Stahl small format folding machines. The most representative are the Quickfolder and Ti52 type. Folding machine.
The new Quickfolder folding machine is a lightweight, flexible desktop device with a maximum paper width of 35.5cm x 50.8cm, a minimum of 7.6cm x 12.7cm, a maximum folding length of 34.3cm, and a shortest length of 5.1cm. The folding speed is 180m/min.
Thanks to the new fully automatic microcomputer control, the operation is easier and the preparation time is greatly reduced. The electronic reminder device can provide help information to the user when a problem occurs. With the multi-language display, the user can also directly control the six most frequently used folding devices on the machine via buttons, making the preparation process easier. In addition, the microcomputer processor can store 4 different operating modes. The length of the paper can be obtained through a simple measuring device on the feeder.
The paper will stop at the fence and the suction wheel on the single paper steam feeder can be equipped with a motor-driven adjustment device. After the operator sets the paper size and selects the folding device, they can automatically position the paper. The data in the original operation program counter is automatically stored and can be called when the machine restarts and starts the next job. However, the automatic setting device is independent, and the user can also manually set the operation program, which means that you can also select the manual setting mode when you finish the job that cannot be set automatically.
Another representative Ti52 PROLINE fence folding machine provides system operation solutions for the most common 50cm×70cm folding pages. Its simple operation, diversified folding modes, and outstanding technical performance are extremely user-friendly. Persuasive.
The Ti52 PROLINE Fence Type Folding Machine is equipped with F52 Fly Paper Feida, which is mainly suitable for medium and short-length folding operations with frequent changes. For commonly used flyers and sample formats, the width of the paper is within 52cm, and the length of the paper is within 84cm. It can achieve extremely high productivity and optimum folding quality regardless of the paper material. The minimum width of the paper separation system is 10cm × 15cm ~ 14cm × 18cm, and the minimum folding length of the small surface stop device is 4cm, 3cm. F52 Feida's maximum speed can reach 40000 rpm.
The Ti52 basic model has 4 or 6 fences in the fence type. Due to the modular structure, a four-fold folding unit can be added to the basic model. It can also be used on the first or second stage. A folding knife folding unit is added behind the bit. As a standard configuration, the first and second barrier-type folding units are equipped with soft polyurethane folding rollers, which increase the stretching force by 40%, and have great advantages, and are particularly suitable for handling smoothly folded sheets. Hard polyurethane folding rollers have so far been an option for handling very thin paper. Barrier folding plates with rotary deflectors are standard, while mixed folding plates are optional. Both folding units are equipped with a pair of slitting shafts, which can be easily removed with a wheel wedge and replaced with tools such as trimming and drilling.
The paper feeder function of the flat paper feeder is completed by the side blower, and Stahl's TREMAT paper separation system can also be selected. The Ti52 folding machine is driven by a frequency converter and the speed is adjusted by a potentiometer in the range of 10m/min (crawling speed) to 180m/min. The folding roller and the slitting shaft are synchronously driven by helical gears with low noise.
The DCT500 digital control system of the Ti52 fence folding machine is a completely new concept. The combination of intelligent control software and advanced drive system not only shortens the adjustment preparation time, but also reduces the shutdown interval. It uses the self-study mode to measure the first folded sheet and automatically sets the length of inhalation and the distance of the sheet. The built-in sheet and batch counters in the DCT500 control system can be used for four different forms of identification.
The optional folding knife folding unit is divided into two types, fixed or movable, and it processes folded paper from 52cm x 42cm to 12cm x 4cm. Drive speeds up to 30000 rpm. The glued and folded paper can be processed with the slitting shaft of the folding knife folding unit, trimming the head and tail, and becoming the final product (flyer, sample).
The Ti52 Barrier Folding Machine can be equipped with a range of attachments to further increase efficiency and productivity, such as mixed fence folding plates, NSF 36 non-stop feeders, gluing devices and other conveyor systems. It is not only a modern technology and equipment, but also has a low investment and low operating costs. It is the most convincing product.
Through the above introduction of the performance of the Perla small-format papermaking equipment and Stahl's small-sized folder, it is not difficult to conclude that Heidelberg's small post-imprint processing equipment has been introduced to meet the needs of the short-run and color-printing markets. Can help the user in the journey to success. Heidelberg will always adhere to the belief that "always exceed the customer's satisfaction" and continue to deliver products of higher quality and higher efficiency to the market in accordance with the needs of customers.