When buying furniture, most people tend to focus on the shape of the furniture, but little is known about how to identify the quality. Insiders suggest that we can identify the quality of furniture from a lot of nuances.
Detecting dry moisture of wood
When the water content is high, the wood is easily warped and deformed. Under normal circumstances, the moisture content of the furniture must not exceed 12%. Consumers generally do not bring their own test equipment when purchasing furniture. Therefore, you can use the method of hand touch to touch the bottom of the furniture or the place where there is no paint inside. If you feel the moisture, then the moisture content of the wood is at least 50. More than %, should not be purchased.
Another way is to sprinkle a little water on the unpainted wood. If the absorption rate is slow or not absorbed at all, the moisture content of the wood is high. If the artificial board is found to have deformation, edge expansion and intermediate unevenness, it means that the water absorption rate of the wood is too high.
Investigate the materials of furniture
The surface materials of furniture generally require hardwood materials, such as ash, eucalyptus, etc. These woods are relatively strong and can bear weight, while other materials can be considered for internal materials; the thickness of the large wardrobe legs is 2.5 cm. Too thick is clumsy, thin and easy to bend and deform; kitchen and bathroom cabinets can not use fiberboard, but should use plywood, because the fiberboard has strong water absorption, it will expand and damage when it meets water; the restaurant table should be washable.
If the wood is found to have insect eyes and foaming, it means that the wood is not completely dried. Such furniture cannot be bought because the insect eyes will become bigger and bigger. After checking the surface, you should also open the home cabinet door and drawer door to see if there is any decay in the material. You can use your nails to lick it, and you can easily break in and the internals are decaying. After opening the door of the furniture cabinet, smell it with your nose. If there is a phenomenon of nose, glare, and tearing, it means that the formaldehyde content in the glue is too high, which will endanger human health.
Whether the structure is firm
When selecting small pieces of furniture such as chairs, stools, hangers, etc., you can drag on the concrete floor and drop it gently. If the sound is crisp, the quality of the furniture is good. If the sound is dumb, there is a murmur. The blink of an eye is not tightly integrated and the structure is not strong. For desks, tables and other furniture, you can swing it by hand to see if it is stable. For the sofa, sit and sit, shake it from side to side, inactive, not soft, no sound, indicating that the structure of the blink is relatively firm.
Is the four feet flat?
Whether the four feet of the furniture are flat, the furniture will be placed on the flat ground and you will know. Some furniture has only three legs to land, and the stability can certainly be bad. Also look at the desktop is straight, can not bow back or collapse, if the table is raised, the glass plate will be rotated to turn; if the table is recessed, the glass plate will be crushed by a pressure. In addition, we must pay attention to the inspection of the cabinet door, the slit of the drawer should not be too large, we must pay attention to the horizontal and straight, the door can not sag.
Whether the edging and sealing are flat and strict
The edge is not flat, indicating that the inner material is damp, and the seal will fall off after a long time of use. The edge banding is preferably rounded and cannot be straight and right angled. The edge of the wooden strip is easily tidal or cracked; the furniture is wrapped with a plywood, and the bag is nailed. It is necessary to pay attention to whether the nail is flat or not, and whether the color of the nail is consistent with other places. Usually the nails are sealed with putty. Pay attention to whether the putty is bulging. If it is bulged, the putty will fall out from the inside.
Is the paint smooth?
The paint part of the furniture should be smooth, flat, not sloppy, wrinkle-free, and flawless. The corners cannot be straight and right angles because the straight edges are prone to slag and paint. The inside of the cabinet door should also be painted, otherwise the board will be easy to bend.
Hardware accessories are ignored
It is necessary to pay attention to whether the installation of furniture hardware accessories is complete, regular and reasonable. For example, check that the door lock switch is not working; the big cabinet should be equipped with 3 dark hinges and 3 wires.
Sofa, soft bed, soft and moderate
When selecting sofas and soft beds, attention should be paid to the surface to be flat, not to be uneven, and to have moderate hardness. The method of selection is to sit down and then rub it with your hand to see if the spring does not ring. If the spring is not arranged properly, the spring will bite the spring and it will make a sound. Secondly, we should pay attention to whether the quilting is broken or jumped, and whether the density of the corner teeth is reasonable.
Our Bakeware use high quality foreign specified cast iron materials, the raw materials are safe and health. Combination of traditional and modern technology, makes the products have many features like: heat transfer quickly, persistent heat resistance, sturdy and durable and so on. Cast iron products are very energy conservation and environmental protection. It can be quickly gathered all heat in a small amount of heat condition. At the same time it has excellent heat preservation ability.
From cornbread, to biscuits, bread loafs, scones and more, EF Homedeco`s Cast Iron Bakeware produces crispy crusts in many fun shapes.
Cast Iron Bakeware
Cast Iron Bakeware,Cast Iron Bakeware Sets,Wax Finish Bakeware,Pre-Seasoned Bakeware
Shijiazhuang Ever Fresh Trading Co., Ltd. , https://www.efhomedeco.com