Mumps antibody (Mumps-Ab) elisa kit instructions

Posted on

Mumps-Ab antibody ELISA analysis
Kit instruction manual
This kit is for research use only.
Drug Name:
Generic name: Mumps-Ab ELISA Kit
purpose of usage:
This kit qualitatively determines the expression of mumps-Ab in monkey blood or other related tissues
Experimental principle:
This kit uses double antigen sandwich enzyme-linked immunoassay (ELISA) to determine monkey mumps antibody (Mumps-Ab) in the specimen. Microporous plates are coated with purified mumps antigen to make a solid phase antigen, which can be combined with the mumps antibody (Mumps-Ab) antibody in the sample. After washing to remove unbound antibody and other components, it is labeled with HRP The mumps antibody (Mumps-Ab) antigen binds to form an antigen-antibody-enzyme-labeled antigen complex. After thorough washing, the substrate TMB is added for color development. TMB is converted into blue under the catalysis of HRP enzyme, and into the final yellow under the action of acid. The absorbance (OD value) was measured with a microplate reader at a wavelength of 450 nm and compared with the CUTOFF value to determine the presence or absence of Mumps-Ab in the specimen.
Kit composition:

1

20 times concentrated washing liquid
30ml × 1 bottle
7
Stop solution
6ml × 1 bottle
2
Enzyme reagent
6ml × 1 / bottle
8
Positive control
0.5ml × 1 bottle
3
Enzyme coated plate
12 holes × 8
9
Negative control
0.5ml × 1 bottle
4
Sample diluent
6ml × 1 bottle
10
Instructions
1 serving
5
Developer A liquid
6ml × 1 bottle
11
Sealing film
2 sheets
6
Developer B liquid
6ml × 1 bottle
12
sealed bag
1

Specimen requirements:
1. Specimen processing: serum and plasma specimens can be directly detected
2. Perform the experiment as soon as possible after the specimen is prepared as required. If it can not be detected in time, the specimen can be stored at -20 ℃ for one month, but repeated freezing and thawing should be avoided.
3. The samples containing NaN3 cannot be detected because NaN3 inhibits horseradish peroxidase (HRP) activity.
Steps:
1.
Numbering: Number the samples corresponding to the microwells in sequence, and each plate should be set with 2 wells for negative control, 2 wells for positive control, and 1 well for blank control (the blank control wells do not add samples and enzyme reagents, the remaining steps are the same)
Add sample: Add 50μl of negative control and positive control (standard) to the negative and positive control wells respectively. Then add 40μl of sample diluent to the sample well, and then add 10μl of the sample to be tested. Add the sample to the bottom of the well of the microplate, try not to touch the wall of the well, gently shake to mix,
Incubation: Seal the plate with a sealing film and incubate at 37 ° C for 30 minutes.
Mixing solution: Add 20 times concentrated washing liquid to distilled water to 600ml and reserve
Washing: Carefully peel off the sealing film, discard the liquid, spin dry, fill each well with the washing solution, let it stand for 30 seconds, then discard, repeat 5 times and pat dry.
Enzyme addition: Add 50μl of enzyme label reagent to each well, except for blank wells.
Incubation: The operation is the same as 3.
Washing: The operation is the same as 5.
Color development: add 50μl of developer A to each well, then add 50μl of developer B, mix gently, and develop for 15 minutes at 37 ℃
Stop: add 50μl of stop solution to each well to stop the reaction (at this time, the blue color turns to yellow).
Measurement: The absorbance (OD value) of each well was measured in sequence with the blank air conditioner at zero and 450 nm wavelength. The measurement should be carried out within 15 minutes after adding the stop solution.
Result judgment:
Test effectiveness: the average of positive control wells ≥1.00; the average of negative control wells ≤0.15
Calculation of critical value (CUT OFF): critical value = average value of negative control wells + 0.15
Negative judgment: the sample with OD value <cut-off value (CUT OFF) is negative for mumps-Ab
Positive judgment: the sample with OD value ≥ critical value (CUT OFF) is positive for mumps antibody (Mumps-Ab)
Precautions
1. The operation is strictly in accordance with the instructions. The components of different batches of this reagent must not be mixed.
2. The kit should be equilibrated at room temperature for 15-30 minutes before being taken out of the refrigerated environment. If the enzyme label coated plate is unopened, the strip should be stored in a sealed bag.

3. Crystals may be precipitated in the concentrated washing liquid, which can be heated and dissolved in a water bath during dilution, and the results will not be affected during washing.

The sealing film is limited to one-time use to avoid cross-contamination.

5. Please keep the substrate away from light.

6. The test results must be determined based on the reading of the microplate reader. When using dual wavelength detection, the reference wavelength is 630nm

7. All samples, washing liquids and various wastes should be treated as infectious agents. The stop solution is 2M sulfuric acid, and you must pay attention to safety when using it.

specification:

96 servings / box

Storage conditions and validity period
1. Kit storage :; 2-8 ℃.
2. Validity: 6 months

Bronze Letters are cut from flat bronze sheet in various thickness.

They can be in Brushed finish, polished finish, oxidized and dark oxidized.

All letters or signs in our sign shop are custom made to order, including Bronze letters.


Over 10 years experience and knowledge in the signage Industry.

We focus on offering our customers one stop service for all the sign products they may require.

Bronze Letters

Bronze Letters,Professional Bronze Letters,Metal Bronze Letters,Bronze Sign Letters, antique bronze letters

Smart Sign Manufacture Co., ltd , https://www.sign-make.com